Inoksan 7GF200E, Instruction Manual

Page: 17 / 44

17
appliance and the network.
• Voltage changes should not exceed ± %10V.
Ground connections and equipotential bonding
• The appliance must be connected to the ground
circuit using the terminals marked by the symbol
located next to the connection terminals.
• • The metal structure of all the electrical appliances
must also be connected to the ground circuit using
the terminals marked by the symbol
located
next to the earth terminals (equipotential bonding
system).
SETTING UP
Testing the electrical system
• Switch on the appliance following the instructions
for use and cheek the operation of the control
devices and plate heating elements.
• Test the various operating temperatures.
• If necessary, consult the Troubleshooting guide to
identify the problem.
Testing the rated thermal power
• Always cheek the thermal power of the appliance
after installation and following maintenance
work. The rated thermal power is indicated in the
“Technical data” table.
TROUBLESHOOTING GUIDE
The plates do not heat up
• Check the fuses.
• Main power switch not ON.
• Low voltage or incorrect electrical connection.
• Switch faulty.
• One or more plates incorrectly connected or burnt
out (replace faulty plate).
Oven heating elements do not heat up
• Check the fuses.
• Main power switch not ON.
• Low voltage or incorrect electrical connection.
• Thrermostat faulty.
• Heating selecyor switch faulty.
• One or more heating elements incorrectly connected
or burnt out (replace faulty heating elements).
The temperature control is difficult or impossible
to regulate
• Switch/Thermostat faulty.
• One or more heating elements incorrectly connected
or burnt out (replace faulty heating element).
REPLACEMENT OF SPARE PARTS
IMPORTANT : Before carrying out maintenance
work or repairs, disconnect the appliance from
the power supply at the isolating switch.
Replacement of cooker switch
• Remove the upper control panel.
• Disconnect the electrical connections from switch
• Replace the switch.
Replacement of oven heating elements
• Work from inside the oven.
• Disconnect the heating elements from the oven and
the cable
• Replace the heating elements.
Replacement of oven switch or thermostat
• Remove the control knob and the vertical control
panel.
• Disconnect the electrical connections from switch or
thermostat Replace the switch or thermostat.