INOKIM OX Hero, Manual

Page: 15 / 26

11
THROTTLE OPERATION
POWER ON
POWER OFF
AUTO OFF
ACCELERATION
LIGHTS FUNCTION
To power the scooter on: press
Waite until LCD display stops
flashing before you start riding.
To shut down the system:
press for three seconds
After 10 minutes of not using any function,
the scooter will automatically shut down.
For accelerating: gently twist the thumb button.
The OX is powerful so be careful!
This function is to limit the full speed of the scooter,
for beginners or for more accurate riding in a
crowded surrounding.
The mode can be changed with the buttons.
Your TRIP distance since your last trip reset.
Reset TRIP by long press
To swap to ODO and battery voltage: press
Your scooters total distance since its factory assembly.
Your current battery voltage status
To turn the front and rear lights on: long press
The LCD back-light indicates that the lights are on.
The lights will turn on automatically if the ambient
photographic coefficient is lower than the set value.
(You can set it in mode 5, p.13)
Your system has encountered an error,
please contact your local dealer to find out what it is.