41
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this
will invalidate the warranty. Do not open the system, as there is a risk of
electric shock.
If a fault occurs, first check the points listed below before taking the system
for repair. If you are unable to remedy a problem by following these hints,
please call distributor immediately for help.
Problem
Solution
No power
※
Check if the AC power cord is properly connected.
※
Press the power switch on rear panel of the Player
to turn on the power.
※
Press the “Standby ON” on the front of the Player
to turn on the power.
No picture
※
Refer to your TV’s manual for correct Video In
channel selection. Change the TV channel until
you see the DVD screen.
※
Check if the TV is switched on.
Distorted picture
※
Sometimes a small amount of picture distortion
may appear, depending on the disc being played.
This is not a malfunction.
Completely
distorted picture or
black/white picture
with DVD
※
Connect Player directly to the TV.
※
Make sure the disc is compatible with the Player.
※
Ensure that the Player’s TV Standard is set to
match that of the Disc and your TV.
No sound or
distorted sound
※
Adjust the volume.
※
Check the audio cable and make sure both are
connected secured to the TV or Stereo Audio In
jacks.
No audio at digital
output
※
Check the digital connections.
※
Check if your receiver can decode MPEG-2 or
DTS. Make sure digital output is set to PCM Only.
※
Check if the audio format of the selected audio
language matches your receiver capabilities.
Summary of Contents for HV-670
Page 1: ...HDD DVD PLAYER HV 670 User s Manual ...
Page 2: ...2 ...
