8
INOGENI SHARE2U User Guide
– V1.10 – February 9, 2021
<RSTR>
Erase the current configuration onboard and return to default values
<BLK>
Black video
<SHW>
Show video
<RST>
Reset the device
<SWUSB>
Select USB source as input 2.
<SWHDMI>
Select HDMI source as input 2.
<POLL>
Returns the current view of the device. In case PPTL1 mode is active, you will
receive:
>>
<POLL>
VIEW => S1
BLACK => disabled
ACK
<GET>
Return the firmware versions and video. Here is an example.
>>
<GET>
StreamerApp => 1.4.1
DeviceID => 0
FX3 => N/A
FPGA => N/A
EDID => N/A
Input 1 => 1920x1080 MJPEG
Input 2 => Unlocked
Input 3 => Unlocked
VIEW => S1
BLACK => disabled
IP => 192.168.0.29
MAC => f8:dc:7a:5:76:8
ACK
<PAN X Y>
Moves PTZ camera horizontally. This is a relative control.
1
X = 1, for USB1
= 2, for USB2
Y = -1, counterclockwise
= 0, stop
= 1, clockwise
<TILT X Y>
Moves PTZ camera vertically. This is a relative control.
1
X = 1, for USB1
= 2, for USB2
Y = 1, camera goes up
= 0, stop
= -1, camera goes down
<ZOOM X Y>
Sets zoom of camera. This is a relative control.
1
X = 1, for USB1
= 2, for USB2
Y = 100 to 500
<PRESET X Y>
Tells PTZ camera to go to a saved preset position.
1
X = 1, for USB1
= 2, for USB2
Y = 1 to 3, for preset 1, 2 and 3
<SAVEPRESET X Y>
Saves current position to camera preset memory.
1
X = 1, for USB1
= 2, for USB2
Y = 1 to 3, for preset 1, 2 and 3
<INV X Y>
Video source flip.
X = 1, for USB1
1
The function works for specific cameras like Logitech
®
Rally, MeetUp and PTZ Pro.
