18
To change the alarm range settings,
HOLD
the
power-on/function key to enter Menu Interface 1.With the
"*" next to
Alm Setup
,
HOLD
the power-on key/function
key to enter in Menu Interface 2. "*" should be at
Sounds Setup
. Press the power-on key/function key to
move "*" to the option you desire to change.
SpO
2
Alm
Hi
and
SpO
2
Alm Lo
refer to the upper and lower limit of
the SpO
2
levels that you wish the alarm to go off at
respectively.
PR Alm Hi
and
PR Alm Lo
refer to the
upper and lower limit of the Pulse Rate levels that you
wish the alarm to go off at respectively.
While the "*" symbol stays on the +/- option, hold the
function key to set the option to + or -. In + mode, select
the corresponding upper or lower limit option and hold
the function key to increase the upper or lower limit; in -
mode, hold the function key to decrease the upper or
lower limit. Move "*" to the
Exit
option, and hold the
function key to return to the monitoring interface.
15
figure below).
3.3.2 Alarm Sound Setting
To turn the alarm on/off,
PRESS
the power-on
key/function key to move "*" to
Alm
.
HOLD
the power-on
key/functional key to switch the option from on to off or
vice versa. When
Alm
is set to on and the measured
values of the blood oxygen saturation (SpO
2
) and/or
pulse rate (PR) go beyond the stated upper or lower limit
(See Alarm Range Setting to set parameters for Alarm),
the alarm will go off. When
Alm
is set to off, the alarm is
deactivated. The alarm will not go off regardless of your
SpO
2
and/or PR values.
3.3.3 Brightness Setting
To change brightness,
PRESS
the power-on key/function
key to move "*" to
brightness
.
HOLD
the power-on
key/function key to set the brightness. There are 5
brightness settings. 5 is the brightest. The factory default
setting is 4. Please note that a brighter setting will drain
the battery faster.
