10
Step 5: Getting ready for next
measurement
Previous reading will continue to show on the
sc
reen. To enter “Ready to measure” mode,
press the
Power/Measure
button once after
color coded ring stops to glow blue or red (i.e.
after 3 seconds from last reading). Screen will
show “- - - -” with auto distance indicator
(
) on and blinking unit (°F or °C).
Repeat Step 3 and Step 4 to continue with
measurement.
If
Power/Measure
button is pressed while
color coded ring still glows blue or red (i.e.
within 3 seconds from last reading), the
screen will show “hold” as the thermometer is
not ready for measurement. Please wait until
screen returns to show previous reading.
Press the
Power/Measure
button again. The
screen now should show
“- - - -” with auto
distance indicator (
) on and blinking
unit (°F or °C). Repeat Step 3 and Step 4 to
continue with measurement.
Step 6: Power off
Press the
Power/Measure
button for about
3-4 seconds at any time to power off the
device.
Device will also power off automatically in 30
seconds if no activity is detected.
