Troubleshooting guide
No dial tone
1. Ensure MU and BU are powered ON
2. Ensure the telephone cable is connected to the BU and the wall socket
3. Ensure that no parallel phone is being used (active)
4. Bring MU closer to BU
Modem not able to dial out
1. Ensure the modem is in tone dialing mode
BU power indicator is not ON
1. Check whether adaptor is connected to BU
2. Check if the power switch on the wall is switched ON
If problem persists, contact Support (see contact details)
Specifications
Carrier frequency
903.5 – 926.5 MHz
Radiated output power
< 1mW
Technology
DynaRF ™ with ALE ™
Power supply (BU)
230V, 20mA, 50Hz adaptor (+/- 10%)
Power supply (MU)
Through the USB port of the system
Input sensitivity
-95 dBm
Guidelines for safe use
Please read this information before using your vaayu ™ hereinafter referred to as
“Product”
Recommendations
1. Always treat your product with care and keep it in a clean and dust free place
2. Do not expose your product to liquid or moisture or humidity
3. Do not expose your product to extreme high or low temperatures
4. Do not expose your product to open flames or lit tobacco products
5. Do not drop, throw or try to bend your product
6. Do not paint your product
7. Do not use your product near medical equipment without requesting permission
PDF created with pdfFactory trial version
www.pdffactory.com
