innove duralam INTEGRA, Operating Instructions Manual

Page: 25 / 32

25
MAINTENANCE
It is normal for some glue to squeeze out of ends of film and build up on rollers. This is easily removed
using a laminator cleaning kit. (Ask your supplier for a cleaning kit - a low cost tool!). Laminator cleaning
kit includes a rubber glue remover block and scrubby to remove loosened glue.
NOTE:
Normally this can take about 10-15 minutes as the laminator has to be turned on 3 or 4 times and
rollers have to be advanced to clean all the glue off.
cLEANING ROLLERs
Laminator should be regularly cleaned with damp cloth and Windex spray or similar to keep laminator
looking new for many years.
cLEANING bODY/cOVER
sTEP 1
• Remove film from laminator
sTEP 2
• Turn heat dial to low setting and
use rubber block to briskly rub glue
build-up. Glue will peel off roller.
(Refer to Figure 29)
sTEP 3
• Wet scrubby and wring out all the
water so it is just damp
• Use scrubby to wipe glue off roller
(Refer to Figure 30)
fIGuRE 29
fIGuRE 30