800.524.2744 www.LCDarms.com
BUTTON PROGRAMMING
With work surface at its lowest position,
press up button and release.
Press up or down button
to stop the
work surface at desired height.
Wait several seconds for light to blink.
While light is blinking,
press up and
down buttons at the same time and release.
1
2
3
1
HOW TO PROGRAM
HOW TO ERASE
With work surface at its lowest position,
press and hold down button
for three seconds.
Light will blink
to confirm setting has been erased.
3
s
STEP 6
Your Winston-E™ height adjust
setting has been erased!
To reprogram the single-touch height
adjust setting, follow the steps
“How to Program” above.
Your Winston-E™
is now programmed!
Next time the up button is pressed,
the work surface will rise and
automatically stop
at your preset height.
To reprogram your single-touch
height adjust setting,
you will first need to erase
the programmed setting
(see below).
PAGE 11 OF 11
Summary of Contents for Winston-E Triple
Page 4: ...800 524 2744 www LCDarms com FREESTANDING BASE STEP 1 2 4 1 3 A B B PAGE 4 OF 11...
Page 5: ...800 524 2744 www LCDarms com WORK SURFACE STEP 2 2 1 C D E PAGE 5 OF 11...
Page 8: ...800 524 2744 www LCDarms com WINGS STEP 3 3 J PAGE 8 OF 11...
Page 10: ...800 524 2744 www LCDarms com CABLE MANAGEMENT STEP 5 1 2 2x Q R 2x PAGE 10 OF 11...