18
Note: If the projector can not display the VGA when boot and select the VGA channel, please
follow the following steps to check and set the computer.
1 Check the VGA cable is connected properly, the input channel change to VGA channel;
2 Set the computer resolution to 1280×720；
3 Turn on the computer external video port. Press the Fn and the screen switching key, to
copy or switch the computer display information to the projector;
4 There is copy and expand display to the external display device function in the computer
setting, if it can not confirm whether the projection display, please check the setting.
5.4 Connecting to PC
Connect one end of the VGA cable to the projector, the other end to the pc or laptop.
Press on the panel or Source on the remote to change to VGA channel.
The complete connection should be like shown below.
