Innovative iBIT RACER Activity Booklet Download Page 16

Page: 16 / 92





Programmable robot with micro:bit

1.6.3 Racer chassis

This chassis is made from high quality PVC plastic. It was designed suitable for

fixing the micro metal gearbox motor and the ball caster wheel. This chassis has many

3mm. holes for fixing the controller board, sensors and more mechanical parts.

1.6.4 Plastic bracket

There are 30 pieces of mixed-color bracket. They are made from PVC plastic.

They can be connected together or by using screws and 3 mm nuts in installation. There

are 3 types; Right angle, Obtuse and Straight bracket.

1.6.5 Strip bracket

They are made from plastic. Each bracket includes 3mm. hole with 5mm. pitch.

Each strip bracket can connect for lenght expansion. The set includes 4 pieces of 3

sizes; 3, 5 and 12 holes type. Total 12 pieces.

Summary of Contents for iBIT RACER





























































































Search results

Summary of Contents for iBIT RACER

Reviews:

Related manuals for iBIT RACER

Brands by name

Popular brands

Innovative iBIT RACER, Activity Booklet

Search results

Summary of Contents for iBIT RACER

Reviews:

Related manuals for iBIT RACER

Brands by name

Popular brands