9
4. Select the appropriate speed.
Listening to a CD
1. Press the “CD” selector button (1).
“---
BUSY CD
” will blink for a few seconds.
Note:
When no disc is set, “NO DISC” will appear on
the display.
2. Press the OPEN/CLOSE
button
(
Note:
This button will not work in AM/FM mode)
3. Place a disc on the tray with the printed label face up.
4. Press the OPEN/CLOSE button
to close the tray.
5. Press the PLAY/PAUSE button (
) to begin playback.
6. To temporarily pause playback, press the PLAY/PAUSE button (
). Press again to resume.
7. To skip tracks forward or backward, press the corresponding skip button (
or
).
Pressing
once will restart the current track. Pressing
twice in succession will return
to the beginning of the previous track.
8. To fast forward / rewind within a track, press and hold down the corresponding skip button until
the desired position is reached.
9. To stop playback, press the STOP
button
Important:
- Never place more than one disc on the tray.
- The disc must be placed in the center of the disc tray. An incorrectly loaded disc can permanently
damage the tray door mechanism.
- Do not push the CD tray – always use the OPEN/CLOSE button.
- It takes a moment for the unit to load a disc, during which all buttons will be temporarily
deactivated.
5. Remove the tone arm-rest holder to release the tone arm.
6. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
7.
When the record reaches its end, tone arm will stop at the center of the record and you must lift
and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect
the tone arm.
Important
:
- Closing the top cover will help prevent dust from settling on the turntable.
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover, especially while playing a record.
