PAIRING 2 SPEAKERS
WARNINGS AND PRECAUTIONS
These products and their packaging are not toys; please keep out of reach of children.
• The remote control and charger are not waterproof and must be kept in a dry location at all times.
• Only use the power adapter provided to charge this product.
• Never charge the product in a pool, water or rain; charge in a dry, indoor location.
• Disconnect the power adapter from power source when not in use.
• Do not stand or jump on this product.
• Do not use this product if it is cracked or damaged.
• Keep the product away from chemicals and heat.
• Do not attempt to open the product.
Outdoor Use:
• The external adapter should not be used outdoors, not exposed to rain, humidity, liquid, or heat.
• The remote control should not be exposed to rain, humidity, any liquid, or heat.
• Do not use these products outdoors if they are cracked or damaged.
• Do not use this product as a flotation device.
• Never charge this product outdoors.
• Floating Pool speaker has a waterproof level of protection, but should NOT be fully submerged as it
may damage the speaker/lights.
General Care:
It is recommended that after use, products are turned off, rinsed using clean water and dried using a
soft cloth. Store these products out of reach of children and out of direct sunlight when not in use.
Pair Both Speakers Together BEFORE connecting to Bluetooth.
Pairing Speakers for the first time
1) Quickly press the ON/OFF button on the two (2) speakers.
2) Press and hold the ON/OFF button on one (1) of the speakers. Hold until an audilbe tone is heard.
This speaker is now the master. The Bluetooth indicator will start flashing to pair with the second
speaker. If paired successfully, the Bluetooth indicator on the master speaker will keep flashing quickly.
The second speakers Bluetooth indicator will flash slowly and will produce an audible beep.
3) Now you can pair with your Bluetooth device. Once the speakers are connected to a Bluetooth
device and the music is paused or stopped the Bluetooth indicator on the master speaker wlll remain lit
(blue). The second speakers Bluetooth indicator will flash slowly.
While in Bluetooth mode and music is playing, the Bluetooth indicator on BOTH speakers will be off.
4) While speakers are paired, quickly press the master speakers’ ON/OFF button. The second speaker
will turn off as well with the Bluetooth indicator remaining lit.
5) When the speakers are paired and the second speaker is turned off, the master speaker will
continue to play audio. (Quickly press ON/OFF button to turn off) The second speaker will disconnect
from pairing mode in 10 seconds allowing the master speaker to function on its own.
To deactivate the pairing function, press and hold either speaker until an audible tone is heard.
Repairing speakers automatically
If speakers were paired before being turned off, they will pair themselves automatically the next time
they are powered on.
Speakers are equipped with a memory function to continue in the same mode prior to being turned off.
Switching master speaker operation
1) Disconnect the Bluetooth device.
2) Press and hold ON/OFF button on the speaker to determine master operation.
