IMPORTANT INFORMATION
5
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
PLAYING AUDIO
Bluetooth Connection
1. Select the Bluetooth function on the Mode Switch. The Bluetooth LED indicator will begin flashing green.
2. Activate the Bluetooth function on your external device.
3. Select “
ITSB-353
” on your device to begin pairing. You will hear an audible beep, signifying your device is
paired and the Bluetooth LED indicator will remain a constant green.
4. Begin playing music on your device. You can control playback, pause, next and previous functions on your
connected device or directly on the radio.
If necessary, press the Play/Pause button for 3 seconds to disconnect pairing of Bluetooth function. The Bluetooth
LED indicator will begin flashing after pairing is disconnected.
Note:
-The operational range between this unit and a Bluetooth device is approximately 33 feet
(10 meters). The
device will also disconnect when the device is moved beyond the operational range. To reconnect the device to
the unit, place it within the operational range.
-Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of your device.
-Compatibility with all Bluetooth devices is not guaranteed.
-Depending on your external device, operation system, etc, not all buttons and functions will
work on all devices.
-Any obstacle between this unit and a Bluetooth device can reduce the operational range.
-Keep this unit away from any other electronic device that may cause interference.
AM/FM Radio
1. Select radio function by sliding the Mode Switch to select AM or FM.
2. Adjust the sound with the Volume Dial.
3. Headphones can be used by plugging them into the Headphone jack on the side of the Radio.
4. Tune to a desired radio station by using the Radio Tuning Dial.
(FM stations are on the top of the dial, AM stations are on the lower part of the dial).
Note:
- For FM: Pull up telescopic antenna. Rotate the antenna to achieve the best sound quality.
- For AM: The Radio has a built-in antenna, therefore the telescopic antenna is not needed.
Simply position the radio to your desired location.
