Innovative Technology ITSB-350, Instruction Manual

Page: 9 / 16

6) If the available FM station is in stereo, the unit will play it in stereo mode
automatically. If the reception is poor, press the MO/ST button on the
remote control to switch it to Mono mode. Press again to turn back to
Stereo mode.
listen to the desired preset channels.
To store the band automatically, press FM SCAN button on remote control.
The unit will scan all available bands and store 20 stations automatically.
to search the specific
4)
5) After the unit is finished scanning, press "PRE/RECALL" button on remote
control repeatedly to select and
2) Press the ( ) button on the unit or press the SOURCE button on the
remote control repeatedly until FM frequency appears on display.
(Standby Mode)
3) Press / TUNE - or / TUNE + button on remote control (or press
or button on the unit) repeatedly band.
automatically for the next available station.
Press and hold the TUNE - or TUNE + button on remote control
(or press and hold the or button on the unit), the unit will search