6
CONNECTING THE 3.5mm AUX IN CABLE
The 3.5mm AUX IN socket in located at the back of the unit. Insert the included
3.5mm AUX cable into the 3.5mm AUX IN socket.
CONNECTING TO A POWER SOURCE
Plug the power cord into a standard 120V
～
60Hz outlet.
The Power indicator will light up.
DOCKING YOUR iPAD
The Tablet Dock is designed to hold an iPad (1
st
generation), but included in the
package you will find two Adapters; one for the iPad 2 and one for iPad (3
rd
generation).
1. Press and hold the
Release
button to release the latch (fig. 1).
2. Meanwhile pull the Tablet Dock down gently as the latch releases. Once it is
in position, a slight “click” will be heard (fig. 2).
3. The Adapters for iPad 2 and iPad (3
rd
generation) are packed separately
along with the unit. Install the appropriate Adapters for your device (fig. 3).
•
To install, place the Adapters into the Adapter Grooves on both sides of
the Tablet Dock. Match the pins on the Adapters with the grooves and
press the pins into the grooves.
•
To remove, press the Adapter pins at the back of the Tablet Dock.
4. Slide your iPad into the Tablet Dock (fig. 4).
Note:
The Arm allows for 360˚ of rotation, at 15˚ increments, to allow for better
viewing angles.
Summary of Contents for ITIU+730
Page 11: ...11 7301204011E...
