U Quick Start Guide
Copyright © Innovative Technology Ltd 2018
Doc: ICU Quick Start Guide
Version: 1.2
Page 2 of 17
1
DOCUMENT INTRODUCTION
1.1
Related Documents
This document should be read together with the following:
For SSP/eSSP:
SSP (GA138): SSP Interface Protocol Specification for integration
SSP Implementation Guide (GA973): Information for programmers and integrators
1.2
Manual Amendments
Rev. Date
Amendment Details
Issued
by
1.0
27/04/2018 First Issue
CW
1.1
18/05/2018
Removed API information, updated to standard SSP comms
Include new images
–
measurement diagrams etc
Added integration sections
CW
1.2
06/06/2018
Updated SSP Comms information and UVC Section
Added Installation and Use Section
Changed some wording to further clarify information
CW
1.3
Copyright
This manual set is Copyright © Innovative Technology Ltd. 2018. No part of this
publication may be reproduced in any form or by any means used to make any
derivative such as translation, transformation, or adaptation without permission from
Innovative Technology Ltd. The contents of this manual set may be subject to change
without prior notice.
1.4
Limited Warranty
Innovative Technology Ltd warrants each of its hardware products to be free from
defects in workmanship and materials under normal use and service for a period
commencing on the date of purchase from Innovative Technology Ltd or its Authorized
Reseller, and extending for the length of time stipulated by Innovative Technology
Ltd.
A list of Innovative Technology Ltd offices can be found in every section of this manual
set. If the product proves defective within the applicable warranty period, Innovative
Technology Ltd will repair or replace the product. Innovative Technology Ltd shall
have the sole discretion whether to repair or replace, and any replacement product
supplied may be new or reconditioned.
