20
Programming The Marquee
All games must have a different game ID number assigned in options before you can proceed with marquee
programming. Only game ID one can control the marquee for programming.
Press the
“
DOWN
”
on game ID one to enter programming. All clowns will go red to confirm they are in
marquee program mode. All clowns will be off if only in game programming mode. The marquee will show
the following screen.
REV
1.05
GAME 1
GAMES
3
GAME 2
LINKABLE
3
GAME 3
This screen is showing how many game it has detected and their current status. This screen can be used to
verify that the cabinets communicating with the marquee. Next to the game ID number is a status light.
There are three different colors they can be. Yellow means that the games are connected together and are
idle. If you where to coin up all other games connected, their status would change from yellow to green
meaning they are current linked and playing a game. If you only start one of the game, the status would turn
purple. To exit this mode, press and hold the
“
SEL
”
button for 2 seconds. The first option will now be
displayed on the screen. Press and hold for 2 seconds the
“
SEL
”
button to advance to the next option. Press
and hold for 2 seconds the
“
UP
”
or
“
DOWN
”
button to change the option value. Press
“
PROG
”
to exit.
2 SECONDS
PROG SEL UP DOWN
