ii
Precautions
This kit comprises 2 modules,
BASIC Commander
®
and Servo Runner A, each with respective
instructions for use and functions. Please refer to these for optimal effects.
When installing
BASIC Commander
®
to the Command Board,
make sure the input voltage is within
the 6-12V range
, otherwise the module may burn.
The input voltage to the Servo Runner A must correspond to the voltage rating of the servo.
Servos
provided in this kit are rated 4.8-6V;
over or under voltage may cause unpredictable results, even
burning of the motor. Make absolutely sure of the correct voltage before connecting the power
supply.
The kit provides a total of 12 servos. When operated simultaneously, they consume a large current;
make sure the power supply or battery connecting to Servo Runner A is capable of providing
8A of
current
, so as to properly operate the kit. Insufficient current may cause unexpected results and
damage of the kit.
When using a battery power supply to the module, the voltage may lower after some while of
operation and cause abnormal actions of the kit. In such case, remove and fully charge the battery
before using again. If prolonged testing and operation is required, we suggest you use a power
supply unit to ensure uniform performance.
Prior to assembling the kit, install InnoBASIC
™
Workshop as per the content of the CD; also
make sure that the PC communicates with
BASIC Commander
®
via a USB cable connection, so
that the entire assembly can be accomplished.