Bluetooth Operation
Bluetooth Car Kit
User Manual
33
1). Place the Car Kit and mobile
handset in 3 meters apart.
3). Set your bluetooth phone to
“discover” the Car Kit .
Following your phone’s instruction
guide for details, active your mobile
handset’s Bluetooth function, the
handset will search for accessible
Bluetooth devices.
4). Your phone will find this Car Kit .
Select this Car Kit from the list.
5). Enter passkey
, then press
“
” to pair the Car Kit and the
handset, the word “
” , will
display in the TFT .
“8888”
OK
PAIR OK
Prior to using the Car Kit for the fist time,
you must pair it with a Bluetooth-enabled
mobile handset.
The following steps describes pairing
the instruction for a typical Bluetooth-
enabled mobile handset.
1. “Pair” To Your Bluetooth Phone
Touch the touch screen , the touch
operation menu will display.
Touch the
section to select the item,
it will display following as below :
Important:
If the pairing can not be completed
within approximately 2 minutes , whiles
the pairing mode is activated, and you
will need to reattempt pairing
(See steps 2-5 above) .
After pairing is completed, if the
ICON is stilling flash on the TFT ,
please follow the steps to to reattempt
pairing through your handset until the
ICON remains solid on the screen.
Once connecting is complete, you may
access the following function. Some of
the below mentioned functions only
accessible for handset supported with
hands-free profile.
2. Using The Bluetooth Car Kit.
6). Select the “
” from the list
on the phone, if you connect success-
fully , the
ICON remains solid on
the screen , then you can operate the
function of blue-tooth about the unite .
CONNECT
2). Put the Car Kit in pairing mode.
.
a Press the POWER button to turn ON,
the
ICON will flash on the TFT .
b. Touch the
section on touch
screen (or Press and hold the
“PAIR/
” button on front panel )
until the word “BLUETOOTH
PAIRING ” display, it’s now ready
for pairing.
Touch the “
” section on the
touch screen (or press and hold the
“ PAIR/
” button on front panel or
remote control) , the word “DIAL
NUMBERS” will display on the TFT .
then you can touch the number section
on screen (or dial the number on the
remote ) and then touch the “
”
section (or press briefly the “PAIR/
”
button on the front panel .).
Make a call
When you dials the wrong number,
touch and hold the “ 8/
” section (or
press the “
” button on the remote)
to delete it.
PAIR
CALL
DVD
11-0:44:36
LUD
SWF
POP
11:08
DISC
CALL
RECALL
PAIR
ZOOM
Touch to select
