Removing and Installing Rear Ballast Weights
Caution:
Ballast weights are heavy. Use a lift or a two-person team when lifting the ballast
weights.
Caution:
Use wood blocks, or a jack, brace the rear ballast weights to prevent them from
dropping or falling.
Removal
1. Remove the ½” bolt holding the ballast.
2. Carefully remove the weights.
Installation
1. Make sure that the area of installation is clear of debris.
2. Carefully place the weights on the rear ballast bracket.
3. Install the ½” bolt in the hole on the ballast. Tighten the bolt.
Figure 3 Rear Ballast
