Instructions for use
1.
Plug the Mains Power Supply Unit into a suitable power socket.
2.
Connect the plug from the LED Visor to the power supply and ensure it is
pushed fully home (see figure 10).
3.
For safety, now switch the LEDs off whilst you fit the visor. Make sure the visor is
adjusted so that you are looking straight through the LED area (see the 'assembly'
instructions for details on how to adjust the visor to fit your head size).
4.
Use the knob on the back of the unit to make these fine adjustments (see figure
12). We recommend that you start with the knob turned fully clockwise (in this
position the headband will be tight to your forehead). Gradually turn the knob
anticlockwise, which slackens the headband, until the 'LED clear' area is centred
in front of your eyes (see figure 13). Make any other fine adjustments as necessary,
by moving the pegs to the appropriate hole in the top strap as previously
described in the assembly instructions.
5.
Wear the tinted glasses provided at all times.
6.
Once you are happy that the unit is comfortable and is positioned correctly,
switch it on at the mains and check that all the LEDs light up (see figure 11).
7.
You are now free undertake most normal activities such as watching TV,
reading, using your computer etc, whilst using Acu-Clear.
For more information about Acu-Clear contact:
Tel 0845 601 0933 Email [email protected] Web www.Acu-Clear.com
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
