- 9 -
5.5. Selecting the display channel
Click on the Input Tab at the top of the window. The following screen will appear:
You can select the input channel to display, whether Lambda or AFR is displayed (when selecting a wideband
Lambda/AFR channel) and also you can set the range of the analog ‘needle’ LEDs. Press the program button
when you are finished.
If you select something other than a Lambda/AFR channel you will first need to connect all your MTS
devices or LM-1 to LogWorks and complete a real-time log. LogWorks compiles channel information
through this process. Exit LogWorks and reconnect to LM Programmer. The list of available
devices/channels will be now be selectable from the ‘Input’ tab.
If you select something other than a
Lambda/AFR channel, the display will change to:
