REV. 04/04/2020 PN:
PG:2
1 year on step and ladder.
1 year on hardware.
MANUFACTURER WARRANTY
B
1)
Insert the four Step Cups into
the holes under the step.*
x4
B2)
With a flat screwdriver, compress the
Step Cup mushroom ring while pushing it
into the hole.
CAUTION
B1)
Insert half of the Step Cup mushroom
ring in the hole, at a 45 degree angle.
D
*MINIMUM OF 1"
CAUTION
To prevent pool liner puncture, keep a minimum 1" gap
between the pool liner and the rear underside of the step.
B3)
Twist the Step Cup to ensure that
the mushroom ring has entirely cleared
the wall thickness. If it has, the suction
cup should rotate freely
C
Failing to install the Step Cup
TM
system will greatly reduce the steadiness of the step and
will void the manufacturer warranty.
Sand
15 LB
Align holes
1)
Fill the ballast with sand. The
approximate weight should be
15 lbs.
2)
Screw the lid in place and
align the cover ribs with the
holes in the ballast base.
3)
Fasten the cover to the
ballast base with the four
screws provided.
x4
D
FIESTA 1003 WITH CLASSIC LADDER 6003
* View step cups installation tips on YouTube:
https://www.youtube.com/watch?v=W5RH1VNxpu0
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
1)
Slowly submerge the step
into the pool. Make sure you do
not damage the pool liner
in the process.
2)
Angle the whole step so that
it is entirely under water. Purge
all the air from under the steps.
3)
Drop the ballast in the step
hole.
E
Security strap
1)
Once the step is in
the pool secure the
platform to the top
seat (see illustration)
using the two straps
provided.
x2
OPTIONAL
:
Once the pool step has
been completely
assembled and secured to
the pool, attach the two
screws supplied through
the platform to the top
seat of your pool to
provided a more rigid
assembly.
x2
E