Innovaphone IP230 Page 7 Operating Manual Download

Page: 7 / 40

Operating Manual

IP Telephone IP230

- 5 -

Mute key

During a call, a long press switches the microphone
off or on. In the idle state, the call signal is switched
off.

Arrow keys

For navigation in the menu.

1.3. Display

Name of active user Number

Symbols Date Time Symbols

The symbols on your display show which state your telephone is in. The following
symbols can be displayed:

Symbol Explanation

The handset symbol is displayed during an active call using the
handset.

The loudspeaker symbol displays that the device’s loudspeaker is
active for listening-in. This can be switched on or off by pressing the
loudspeaker key.

The microphone symbol shows that the device’s microphone is active.

A flashing microphone symbol indicates that both microphones are
switched off.

These symbols are displayed during an active call in hands-free mode.
Loudspeaker and microphone are both active.

This symbol shows that the headset is connected. See chapter (7.1.).

This symbol appears if the active lock is set up for your keypad. Unlock
by pressing any key and entering your PIN. See chapter (7.3.).

This symbol appears if a conditional call diversion is set up. See
chapter (6.1.).

Summary of Contents for IP230









































Search results

Summary of Contents for IP230

Reviews:

Related manuals for IP230

Brands by name

Popular brands

Innovaphone IP230, Operating Manual

Search results

Summary of Contents for IP230

Reviews:

Related manuals for IP230

Brands by name

Popular brands