page 58
innovaphone IP DECT
Clicking
OK
saves the settings made.
4.2.4.2 Administration/Diagnostics/Tracing
Using the
trace (buffer)
link, the trace information of the VoIP device can be
viewed and saved. In the process, a text file
log.txt
is generated, which displays
the current trace in a new browser window.
Using the
trace (continuous)
link, the continuous trace information of the de-
vice can be viewed and saved. In the process, a text file c
log.txt
is generated,
which displays the current trace in a new browser window. As already mentio-
ned, the messages are continuously automatically updated and are scrolled up-
wards, out of the window.
For both trace variants, only messages that were enabled in this menu are dis-
played. Not every section and not every setting is visible; this will depend on
which device is being used.
DECT
section:
Interfaces
section:
VOIP
section:
BRI1-n
All BRI1-n connections – only visible for devices with BRI
interface.
PRI1-n
All PRI1-n connections – only visible for devices with PRI
interface.
System
Information on the DECT system.
Master
Information on the DECT master.
Radio
Information on the DECT radio.
PPP
Information on the PPP interface.
TEL1-n
Information on the TEL1-n interface.
BRI1-n
Information on the BRI1-n interface.
PRI1-n
Information on the PRI1-n interface.
prot
The
prot
check boxes after the individual interface settings
give information on the protocol used.
H.323/
RAS
Information on H.323 RAS.
