Errors excepted, subject to availability and modifications.
E 05/2020 | A 05/2020, Copyright © 2000-2020 innovaphone® AG
innovaphone® AG | Umberto-Nobile-Str. 15 | D-71063 Sindelfingen | Phone +49 7031 73009-0 | www.innovaphone.com | E-Mail: [email protected]
12 / 12
innovaphone IP101/102 – User Guide
Resetting the Phone
To restore the phone to its factory default settings, you first need to disconnect the power. If you are using a
power supply unit, you have to disconnect the power supply from the "POWER" socket on the back of the
device. If you are using a LAN (PoE) power supply, unplug the network connector from the "LAN" port on the
back of the device. Now, the respective plug on the back is plugged in again, while simultaneously pressing
and holding down the correction key
on the telephone keyboard. Continue pressing the key down until
the LED of the telephone first flickers in very short intervals and then changes to a flashing mode after the
end of the flickering. The entire process takes about 30 seconds.
If you now disconnect the phone from the power supply again and then reconnect it, the device is in its
factory default state and you will be asked to enter a provisioning code:
This code can be obtained from the administrator. After entering the code, press the "hash key" to
confirm the code.
About this Document
This document refers to the IP101 and IP102 phones with the firmware:
Version 13 R1 SR11 [13.2291 / 131744]
Brand names are used without guarantee of free usability. Almost all hardware and software names in this
manual are also registered trademarks or should be considered as such.
All rights reserved. No part of this manual may be reproduced in any form (print, photocopy, microfilm or any
other method) or processed, copied or distributed using electronic systems without express permission.
Great care has been taken in the compilation of texts and illustrations and in the creation of the software.
Nevertheless, errors cannot be completely ruled out. This documentation is therefore supplied under
exclusion of any warranty or assurance of suitability for certain purposes. innovaphone reserves the right to
improve or change this documentation without prior notice.
