4. Put down the clip and slide it to lock in position.
5. Put in the battery and install the back cover.
Charging the battery
Check the model number of the charger before using it to charge
the mobile.
Only use approved battery, charger and accessories applicable to
the specific mobile model. Using other types of battery, charger
and accessories may violate the certification or warranty terms of
the equipment and may result in danger.
Refer to the dealer for supply of relative approved accessories.
Hold the plug to plug out and cut off the power supply of
accessories instead of pulling the power cord.
1. Plug the charger in an AC power socket.
2. Insert the plug contact of the charger at the other end into the
jack at the side of the mobile.
If the battery runs out of electricity, you may have to wait for a
few minutes till the symbol of charging is shown on the screen,
and then you can make any call and answer any call.
The time of charging depends on the charger you used.
Note: Please do not at the same time insert the charger and USB data line,
if inserted at the same time may cause your computer and mobile phone
damage (or lead to USB data cable can not be identified).
