22
Note: Cover the hole using the adaptor cap when not in use.
The duct can be compressed or extended moderately according to the installation requirement, but it is
desirable to keep the duct length to a minimum.
IMPORTANT: DO NOT OVER BEND THE DUCT (SEE Fig.16)
During dehumidifying modes, remove the drain plug from the back of the unit, install the drain
connector(5/8
universal female mender) with 3 /4
hose(locally purchased). For the models
without drain connector, just attach the drain hose to the hole. Place the open end of the hose directly
over the drain area in your basement floor. Please refer to Fig.17&18.
Water drainage