HAPPY REHAB 2. INSTRUCTIONS FOR USE (EN) Rev. 1.0 Page 10
The height of the table can be adjusted by loosen the two hand wheels (A, Fig 6)
and slide the table up- or downwards, then fasten the two hand wheels (A, Fig 6)
again tightly. Verify the table is in place and the two hand wheels (A, Fig 6) are
properly tightened.
Fig. 7: Adjustment of height of back support.
The height of the back and hip supports (if applicable) can be adjusted by loosen
the two hand wheels (A, Fig 7) and slide the inner frame up- or downwards, then
fasten the two hand wheels (A, Fig 7) again tightly. Verify the inner frame is in
place and the two hand wheels (A, Fig 7) are properly tightened.
Fig. 8: Adjust the position of the back supports.
To adjust the position of the back support (back and forth), loosen the hand wheel
(A, Fig. 8) in each side. The back support can be moved back and forth to fit the
user in a correct upright position. After adjusting the position of the back support,
verify the back support is in place and the according hand wheels (A, Fig. 8) are
properly tightened.
The back support is NOT a seat! The back support may only be
used to support the back of the user in an upright position.
