Innovaciones M.S. 630401, Instruction Manual

Page: 23 / 74

23 23 23 23
- Once the sliding closures (zippers) have passed, they must be locked as in-
dicated in figure 1, completely covering the cursors of the zippers, avoiding
possible contact of the child with the arrow keys.
- Insert the four metal tubes into the fabric clips at the bottom of the height
regulator. Attach the tubes two at a time. As indicated in drawing 5.
- When putting the mattress on the base of the height regulator, remember
that the adhesive tapes of the padded bed base must be inserted through the
openings in the bottom fabric, and then fix them to the bottom so that the
bed base is immobilized . Drawing 6, figure 2.
- Always remember to ensure the perfect installation of the height base and
the mattress before putting the child inside the crib.
- NEVER LEAVE THE CHILD ALONE OR UNATTENDED.
11. 12. 13. CRIB FOLDING:
- Remove the padded bed base. Remove the height regulator if ne-
cessary.
- Lift the bottom of the cradle by pulling on its central part.
- To fold each of the tubes of the upper frame, lift it slightly by means
of the handle (see figure 3) and fold the frame.
- Fold the crib and place the bed base around it to keep it folded.
14. Wheel lock.
To lock the wheels, press the brake located on each of them.
To unlock, lift the brakes.
Warning: lock the crib in a fixed position when the baby is inside wi-
thout supervision.
INSTRUCTIONS FOR THE USE OF THE CHANGER
(EN 12221-1: 2008 + A1: 2013)
IMPORTANT: SAVE THESE INSTRUCTIONS AS A
REFERENCE. READ THEM CAREFULLY.