Innovaciones M.S. 1876, Instructions For Use Manual

Page: 51 / 226

11
22
23
51
5.1.5
Keep the child’s safety seat in the vehicle seat in the same direction.
(Figure 5.1.1).
5.1.6 Please adjust the child’s safety seat to the angle of 1 or 5 stalls, a
total of 1, 2, 3, 4, 5, gear, 1 gear for the upright position, 5 gear for the vertical
position. (Figure 5.1.3) (Figure 5.1.4)
5.1.7
Pull out the vehicle’s three-point seat belt and slide the belts from
the gap between the base (22) and the chair (11) in the direction of the arrows
into the two base guide hooks (23), insert the vehicle harness jack In the buc-
kle, tighten the vehicle seat belt. (Figure 5.1.2).
5.1.8
Install the shoulder strap part of the vehicle three-point seat belt into
the guide groove (14). (Figure 5.1.5)
5.1.9
Tighten the vehicle harness to ensure that there is no slack and twist.
(Figure 5.1.6).
5.1.10
Please follow the “4.1.14” children to use the five-point seat belt
steps to place the child sitting.
5.1.8
Install the shoulder strap part of the vehi-
(Figure 5.1.1)
(Figure 5.1.2) (Figure 5.1.3) (Figure 5.1.4)
5. Forward installation instructions
5.1 Group I (9-18kg) children’s
three-point car seat belts +
five-point seat belts
5.1.1
Make sure that the five-point seat belt
is properly installed on the child’s safety seat.
(Refer to section 8).
5.1.2
Refer to Section 3.2 to adjust the fi-
ve-point harness.
5.1.3
Refer to Section 3.4 to adjust the chair
body (11) to the proper position and confirm that
it is locked (not slidable).
5.1.4
Refer to Section
3.5 to adjust the chair body (11) to the forward
position and confirm that it is locked (not rotata-
ble).