MU8016-012ENG rev02
8
-3-
XTIRPA SYSTEM REQUIREMENTS
IMPORTANT:
If you have questions on the use, care or suitability of the XTIRPA system
for your application, please contact the manufacturer INNOVA Public Utility Products Inc.
IMPORTANT:
Record the product identification information from the ID label in the main
-
tenance and inspection log of this Instruction and safety manual.
IMPORTANT:
Record purchasing date and also date of first use on the maintenance and
inspection log sheet included in this safety instruction manual.
a) The XTIRPA system is intended to be used as part of a personal protection equipment sys-
tem for fall protection, work positioning, personnel handling, materials handling, or rescue,
for use in confined spaces. The XTIRPA system is intended to act as a support structure
or anchor for these uses. The XTIRPA system must be used only with adapters, anchors,
connectors (EN 362), and other components, parts or subsystems that have been certified,
approved and recommended by the manufacturer.
WARNING:
This system should never be used to transport personas and material at the
same time.
b) Substitutions or replacements made with non-approved adapters, anchors, connectors (EN
362), other components, parts or subsystems may be incompatible, may jeopardize the safe-
ty and reliability of the complete XTIRPA system and may result in serious injury or death,
for which the manufacturer disclaims all warranties and liabilities whatsoever, user, owner
and purchaser of the XTIRPA system waiving all claims, rights and recourses against the
manufacturer derived therefrom.
c) The connectors (EN 362) (hooks, carabiners, D-rings) must meet the EN362 standard.
d) Make sure the lifeline cable or rope is positioned directly over the work area. Use only cer-
tified lifeline cable or rope, in perfect working condition, with appropriate specifications, in
-
cluding maximum leverage capabilities, for the intended use of the XTIRPA system.
e) Owners must make sure that, before each use, all users of the XTIRPA system have read,
understood and follow the manufacturer’s Instructions and safety manual.
f) Owners must also make sure that all users have successfully been trained in using the XTIR-
PA system, before allowing them to use the XTIRPA system, and at least annually thereafter.
g) A person who has not read the instruction and safety manual, has not been trained in using
the XTIRPA system and does not understand all operation and safety instructions, is not
qualified to operate the XTIRPA system. An untrained user exposes himself and others to
possible serious injury or death, for which the manufacturer disclaims all warranties and
liabilities whatsoever, user, owner and purchaser of the XTIRPA system waiving all claims,
rights and recourses against the manufacturer derived therefrom.