7.4: On a stretch of water free from obstructions and other boat traffic, run an assortment
of baits close to your boat so you can see their “action”. It may be necessary to place the
rod tip in the water to get bait deep enough to see it’s action. Using iTroll’s display, note
the slowest and highest speeds where your baits have acceptable action. Write down these
speeds so they can be used for Low and High limit programming. Take note of wind and
current conditions as you may have to compensate for them when setting the limits.
*** Section 8: Programming Hunt Mode Low and High Limits ***
*** Hunt Enabled or Hunt Test Drive iTroll units only ***
8.1: The menu to reprogram the Hunt Low and High limits are a side menu when you pro-
gram iTroll’s regular Hunt Parameters (MinSpeed, MaxSpeed, Step Size and Step Time).
Simply follow the steps in Section 4 and make sure you
perform Step 4.1A.
*** Section 9: Dual Motor Control Feature ***
Dual Motor Mode is a software upgrade that is in every iTroll.
Once unlocked, it is per-
manently enabled for the life of your iTroll
. Call your dealer or Innova at (909) 971-0000
to purchase an unlock code. Please note that unlocking Dual Motor Mode is performed in
the field and takes just a few minutes. When dual motor enabled, iTroll can control BOTH
your main and kicker motors.
If dual motor mode is enabled, when you turn your iTroll on, you will see a screen that
asks you to select the motor that iTroll will control. This screen will only be visible for a
few seconds, and if you DON’T make a motor choice, iTroll will remember the last motor
it was operating prior to being shut off.
Note: Servo motor installation is required on throttle of second motor to allow iTroll to
control it. Parts to do so are available at additional cost.
*** Section 10: Left and Right Steering Buttons ***
iTroll can control other manufacturer’s steering units (NOT included with iTroll) that
link to your kicker motor. Contact the manufacturer of your particular steering unit for
instructions on how to interface it with iTroll. Please see iTroll’s installation instructions
for technical information on steering outputs.
iTroll’s steering buttons only operate when iTroll is ON.