Innova IN-8007, Instruction And Safety Manual, Page: 3 / 29

MU8007-002ANG Rev1 2016
P. 2
DESCRIPTION & INTERPRETATION OF
MARKING SYMBOLS
This symbol is used to alert the user to a potential hazard. The safety of the worker is in
jeopardy. It is imperative to follow the manufacturer’s recommendations.
This symbol asks the user to read and understand the manual for this product before use.
This symbol specifies that the system should be used by a single user.
-1-
APPLICATION
The XTIRPA

System, and its many components and parts (including davit arm, manhole guard, mova-
ble adapter, permanent adapter, integrated mast and side entry cart), are intended to be used as part of a
personal protection equipment system for fall protection, work positioning, personnel handling, materials
handling, or rescue, for use in confined spaces. The
XTIRPA

System is intended to act as a support
structure or anchor for these uses.
-2-
RESTRICTIONS
a) CAPACITY: The maximum working load for this product is 360 lbs (164 kg).
According to (ANSI, OSHA, CSA).
According to EC (EN 795: 2012), use an EN - 360 and/or EN - 363 fall protection system
or an EN - 1496 recovery system.
b) The manufacturer attests that anchoring devices have been tested accordingly to the current European
standard (EN 795:2012 Type A, Type B and Type E) and, except otherwise stipulated, they are to be
used by a single person using a shock absorber in accordance with regulation EN 355.
c) PRECAUTIONS: Take the necessary precautions to limit injuries to the user and risks of damaging
the
XTIRPA

System.
d) Use of the XTIRPA

System in areas where environmental hazards exist may require additional pre-
cautions to limit the possibility of injury to the user or damage to the XTIRPA

System. Hazards may
include, but are not limited to: high heat, fire, flame, smoke, fumes, caustic chemicals, corrosive environ-
ments, high voltage power lines, sudden changes of pressure, explosive or toxic gases or substances, wa-
ter or risks of flooding, risks of wall, ceiling or floor collapsing, moving machinery and sharp edges.
e) Install and secure all signaling and other precautionary and security measures, including but not lim-
ited to, notifying users, bystanders and vehicle operators circulating near the
XTIRPA

System of the
presence of the XTIRPA

System and its workers, before starting work.