Innova S.r.l.
Pag. 5
N420229A_ManualHRW_rev2.en.docx
•
Power supply unit must take place with electrical cables with a suitable section of the 'power unit. The voltage and
frequency values must correspond to those indicated for the respective machines; All units must be earthed in compliance
with current legislation in the different countries.
•
Do not enter R134A into atmosphere: R134A and the 'a fluorinated greenhouse gas, covered by Kyoto Protocol, with a warming potential
•
Global (GWP) = 1975.
1.1.3
SYMBOLOGY
The symbols shown in the following file, allow to quickly provide information necessary for the proper use of the unit.
Symbols on safety
CAUTION
Only authorized personnel
It warns that the indicated operations are important to the operation of the machine
safety
DANGER
Risk of electric shock
It warns that failure to observe the precaution may cause electric shock.
DANGER
It warns that failure to observe the precaution may cause risk of injury to exposed
persons.
WARNING
It warns that failure to observe the precaution may cause damage to the unit or system.
DANGER
It warns that there is the presence of moving parts and involves a risk of damage to
exposed persons
1.1.4
WARNINGS
The installation of the unit must be performed by personnel qualified according to the regulations in the various countries.
If the installation is not performed could become a dangerous situation
Avoid installing the unit in wet rooms or in the presence of large amounts of heat.
On the electrical side to prevent any risk of electrocution, it is essential to disconnect the main switch before making
electrical connections and any maintenance operation.
In the case of all 'inside the unit water spills, place the main switch of' plant to "Off", turn off the taps dell '
water and contact technical service
