Innova S.r.l.
Page 10
HRP DOMO EXT Manual
To mount the unit in the framework, disassemble the
partition on the exhaust side using the 4 threaded screws;
If the partition has been disassembled in preparation for
reassembly of the fresh air and exhaust tubes to the
outside of the framework, proceed to the next step;
Exhaust partition disassembly for unit assembly
Position the unit on the upper bracket, moving the unit
upwards and matching the two lower sleeves with the
tubes supplied in the framework;
Mounting in framework with bracket
Position the unit on the rear bracket and check the
connection of the lower sleeves with the tubes supplied
with the framework;
Secure the unit using the bottom bracket on the bottom
wall using the supplied screw;
Mounting in framework with bracket
