Innova Srl
Page 9
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
2
INSTALLATION
2.1.1
INSTALLATION CONDITIONS
The unit must be installed according to national and local standards that regulate the use of electrical devices and according to the
following indications:
•
install the unit inside residential buildings with ambient temperatures between 0 °C and 45 °C;
•
avoid areas near sources of heat, steam, flammable and / or explosive gases and particularly dusty areas;
•
install the unit in a place not subject to frost (the condensate water must be drained not frozen, at a certain inclination,
using a siphon);
•
do not install the unit in areas with a high relative humidity rate (such as a bathroom or toilet) to avoid condensation on
the external surface;
•
choose an installation site where there is sufficient space around the unit for the connections of the air ducts and to be
able to carry out maintenance operations;
•
the consistency of the ceiling / wall / floor where the unit will be installed must be adequate for the weight of the unit and
not cause vibrations.
The environment chosen for the installation must contain:
-
connections of the external air ducts;
-
230 V single-phase electrical connection
-
connection for condensate drain.
