Innova Srl
Page 6
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
For connection, use a cable that is long enough to cover the entire distance, without any connection; do not use extension
cords and do not apply other loads to the power supply but use a dedicated power circuit.
After connecting the electrical cables, make sure that the cables are arranged so as not to exert excessive forces on the
covers or electrical panels; any incomplete connection of the covers can cause overheating of the terminals.
Make sure that the earth connection is made; do not ground the appliance on distribution pipes. Momentary surges of high
intensity could damage the unit
Installations performed outside the warnings in this manual or use outside the operating limits will instantly void the
warranty.
Make sure that the first start-up is carried out by personnel authorized by the company (see first start-up request form)
1.1.5
COMPLIANCE
The CE marking (present on each machine) certifies compliance with the following Community standards:
•
Low Voltage Directive
2014/35 / EC
•
Electromagnetic Compatibility Directive
2014/30 / EC
•
Ecodesign
2009/125 / EC
•
RoHS2
2011/65 / EU
•
WEEE
2012/19 / EC
1.1.6
RANGE
-1-
-2-
-3-
HRC +
60
H
I
1) Defines the maximum
flow rate
Size: 60 up to 600 m³ / h 120
up to 1200 m³ / h
2) Type of installation
H: horizontal
3) Type of control
I: electronics I
