Usage Instructions
Clean before initial use – refer to cleaning instructions on page 4.
CAUTION:
• Always ensure the appliance is OFF and unplugged from the power
outlet before attaching or detaching the blending shaft. Do not plug
the appliance into the power outlet until it is fully assembled.
• Never immerse the blender body in food or liquid!
• Always release the START or TURBO button and wait for the blades to
come to a complete stop before removing appliance from ingredients.
• Do not operate this appliance continuously for more than one minute.
After one minute of use, unplug and let the unit rest until it cools down
before using again.
• Not suitable for use in non-stick cookware.
Let’s get blending!
1. Attach the blending shaft to the blender body and turn anti-clockwise
until the blending shaft clicks and locks into place. Use the icons on the
blending shaft and the line on the blender body as a guide. Be certain
the blending shaft is securely locked in place.
2. Place your food and/or liquid into a container that is tall enough
to avoid splashes or spills. Ensure container is placed on a flat, dry
surface.
3. Plug the appliance into the power outlet.
4. Carefully immerse the blending shaft so the ingredients in the
container cover the blades. Never immerse the blender body in food
or liquid. Select the speed. Then press and hold the START button to
begin blending. (Always immerse the blending shaft first, to avoid
splashes!). The processing speed is set with the speed dial. The higher
the setting, the faster the blending results.
5. Work through the ingredients with a gentle up and down movement of
the appliance. You can get the maximum processing speed by holding
the TURBO button instead of START. You can also use the TURBO
button for instant powerful pulses without having to use the speed dial.
6. To stop the appliance, release the START or TURBO button and wait
for blades to come to a complete stop.
7. Remove the appliance from the container and unplug from the power
outlet. Detach the blending shaft from the blender body by turning
clockwise.
8. Done! Refer to cleaning instructions to get your appliance looking
spick and span.
5
STEP THREE
Lock
STEP FOUR
Unlock
STEP ONE
Align
STEP TWO
Connect
