15
OBD2 DIAGNOSTICS
Viewing Scan Results – OBD2 Diagnostics
complete self-diagnosis and testing of the assigned system. A drive cycle may need to be performed to complete
the testing.
Green/Gray Flashing Icon =
Description:
This icon indicates that the monitor has not completed testing This Driving Cycle (KOER).
Tips:
The monitor has not met all conditions required to complete self-diagnosis and testing of the assigned
system. A drive cycle may need to be performed to complete the testing.
Red/Gray Flashing Icon =
Description:
This icon indicates that the monitor has been disabled This Driving Cycle (KOER).
Tips:
The monitor is unable to complete self-diagnosis and testing of the assigned system. The monitor is
disabled for this driving cycle, check for failed OBD Monitor Test and refer to the service information before
continuing.
Viewing Drive Cycle Procedures
A Drive Cycle for a monitor requires that the vehicle is driven in such a way that all the required “Enabling Criteria”
for the monitor to run and complete its diagnostic testing are met. You can use the tablet to view the Drive Cycle
procedures for a selected Monitor.
1.
From the Monitor Status field on the OBD2 Diagnostic page, tap the
View Drive Cycles
button.
n
The Drive Cycle Procedures page displays.
n
The
Drive Cycle Monitors
column on the left lists the monitors supported by the vehicle;
and shows the status of each monitor at the time the scan was run
(Complete
,
Incomplete
,
or
Disable).
n
The right column of the page shows the
Drive Cycle
procedure for the currently selected
monitor.
2.
Tap a monitor name to view the Drive Cycle procedure for the selected monitor.
n
The page refreshes to display Monitor information and the Drive Cycle procedure for the