Innova 607NT User Instruction Download Page 16

 

 

CHILLER 607NT-608NT User manual N - REV20160118_EN.docx 

Page 16 of 18 

 

 

6.0

 

WARRANTY 

 

If any part of the Innova air conditioning unit fails due to a manufacturing defect within 24 month from 
the date of original shipment by Innova, or within 12 months from the date of original start-up, 

whichever is the earlier date, Innova will supply without charge the required replacement part.  

The owner of the product may ship the allegedly defective or malfunctioning product or part to 
Innova at his charge: Innova will analyse the defect and, provided it is covered under warranty, will 

repair or replace it without charge. All costs for shipment and risk of loss or damage during shipment of 
the product or parts to Innova and back to the owner shall be the responsibility and liability of the 

owner. 

The service labour outside Innova factory, if needed in the warranty period, will be at the owner 
charge. 

 

The responsibility of the owner of the equipment includes the following: 
 

1.

 

To operate the equipment according to the manufacturer’s instructions. 

2.

 

To provide easy accessibility for service. 

3.

 

To check and reset circuit breakers and disconnect before calling for service. 

4.

 

To keep the unit clean and free of dirt. 

5.

 

To keep the condenser coil free of sediment and scale. 

6.

 

To keep clean the fresh water circuit, and the evaporator brazed plates exchanger. 

7.

 

To pay the charges incurred when any of the above has not been done. 

8.

 

To pay for repair or replacement of any material or part other than those within the Innova unit. 

9.

 

To check any fuses on the circuit board and replace as required. 

 

This warranty does not cover damages caused by improper installation and use, misuse of equipment, 
negligent servicing, natural disasters, flooding, fire, wrong electrical and hydraulic connections, power 

supply not in according to manufacturer’s specifications. 

 
 

 

 
 

 
 

 

 
 

 

 
 

 

 
 

 

 
 

 

 
 

 

 
 

 

 
 
 
 
 

Summary of Contents for 607NT



















Reviews: