Using the Scan Tool
VIEWING ENHANCED DTCs
46 OBD2
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
and
buttons, as necessary, to view the
additional information.
The Scan Tool will display a code only
if codes are present in the vehicle’s
computer memory. If no codes are
present, a “No Enhanced DTC’s are
presently stored in the vehicle’s
computer” is displayed. Press the
LD/M
button to return to the
Honda/Acura Enhanced menu.
3.
If more than one code was retrieved press the
DTC/FF
button,
as necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK
button again.
4.
When the last retrieved DTC has been displayed and the
DTC/FF
button is pressed, the Scan Tool returns to the Honda/Acura
Enhanced menu.
To view
additional
enhanced DTCs, repeat steps
1
through
4
, above.
To exit the enhanced mode, use the
UP
and
DOWN
buttons, as necessary, to select
Exit
from the Honda/Acura
Enhanced menu, then press the
ENTER
button. The Scan
Tool returns to the OBD2 DTC screen.
Toyota/Lexus Enhanced DTCs
When the Scan Tool enters the “enhanced”
mode (and
Toyota/Lexus
is selected, if
prompted), the Toyota/Lexus Enhanced
menu displays. Depending on the protocol
used to communicate with your vehicle, the
Toyota/Lexus Enhanced menu provides
options to view:
Current DTCs, History DTCs or Pending
DTCs
Current DTCs, Historical DTCs or
Readiness DTCs
1.
Use the
UP
and
DOWN
buttons,
as necessary, to highlight the desired
option, then press the
ENTER
button.
Summary of Contents for 3130b
Page 1: ......
Page 84: ...Notes 82 OBD2...
Page 85: ...Notes OBD2 83...
Page 86: ...Notes 84 OBD2...