Using the Diagnostic Tool
VIEWING OEM ENHANCED DTCs
3120d 45
The Diagnostic Tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a “No OEM En-
hanced DTC’s are presently stored
in the vehicle’s computer” is dis-
played. Press the M button to return
to the Main Menu.
3.
If more than one code was retrieved press the DTC button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Diagnostic Tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK
button again.
4.
When the last retrieved DTC has been displayed and the DTC
button is pressed, the Diagnostic Tool returns to the “Priority” Code.
To view additional OEM enhanced DTCs, repeat steps 1 through
4, above.
To exit the enhanced mode, press the M button. The Diagnostic
Tool returns to the Main Menu screen.
Honda/Acura OEM Enhanced DTCs
When OEM Enhanced is chosen from the
System Menu (and Honda is selected when
prompted), the Honda Enhanced menu
displays. Depending on the protocol used to
communicate with your vehicle, the Honda
Enhanced menu provides options to view:
Confirmed DTCs or Pending DTCs
Permanent DTCs or Temporary DTCs
1.
Use the UP
and DOWN
buttons,
as necessary, to highlight the desired
option, then press the ENTER
button.
A “One moment please” message
displays while the Diagnostic Tool
retrieves the selected DTCs.
If the Diagnostic Tool fails to link to
the vehicle’s computer, a “Linking
Failed” message shows on the
Diagnostic Tool’s display.
- Verify the ignition is ON, then
press the POWER/LINK
button to continue.
2.
To read the display:
Summary of Contents for 3120d
Page 1: ......