4
Innosilicon After-sales Team
Email: [email protected]
3.Operate the miner
3.1 Enter the miner console
DHCP is the default IP mode of the miner (The normal indicator of the control board now is flickering in
green when the DHCP service of the router is enabled.). Find the IP via the IP scanner or the SetIP tool
developed by our company.
Pls refer to the official support center for the downloading address
https://www.innosilicon.com/html/support_en/tool.html
a. Save SetIP in the pc on the same network with the miner, then double click the tool and
choose the language.
b. Report the miner IP
Press the IPset button 1 to 2 seconds then
the IP of the miner will show here
