Experience and Reliability in Radar Technology
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by
the recipient to third parties without prior consent of InnoSenT in writing.
Pag
e
1
Q
U
ICK S
TA
RT
G
U
IDE IMD
-2000
STEP 1: Install the IMD-3101 Target Viewer
The software package can be downloaded from our website at
https://www.innosent.de/en/downloadportal/
Open the setup file of the IMD-3101 Target Viewer software package:
IMD-3101 -> GUI -> TargetViewer - IMD3101_V1.xxx.exe and follow the instructions of the installation on your
Windows PC.
STEP 2: Mount the IMD-3101 sensor in a stationary position, e.g. on a tripod
Align the sensor in one direction.
Check the correct orientation and mounting angle of the sensor for your required Field of
View (FOV).
STEP 3: Connect the module to your PC
To connect the sensor to your PC via USB-port, use a TTL-232R-3V3 cable from FTDI. The
connector is compatible with the UART-USB-Converter. The cable is not included in the
evaluation kit
.
The orientation must be according to this picture.
You can find information about the sensor’s pinout in its data sheet.
Configure cable latency in Windows device manager to 1ms. Pay attention to the COM-Connection-Port
you placed the sensor.
