background image

User Guide for Talaria TWO Evaluation Board

 

 

 

Version 1.1 

27 

©InnoPhase, Inc. 2020 

14

 

Support 

1.

 

Sales Support: Contact an InnoPhase sales representative via email – 

[email protected]

 

2.

 

Technical Support: 

a.

 

Visit

https://innophaseinc.com/support/

 

b.

 

Also Visit:  

https://innophaseinc.com/talaria-two-modules

 

c.

 

Contact: 

[email protected]

 

InnoPhase is working diligently to provide outstanding support to all customers.  

15

 

Disclaimers 

Limited warranty and liability — Information in this document is believed to be accurate and reliable. 
However,  InnoPhase  Incorporated  does  not  give  any  representations  or  warranties,  expressed  or 
implied, as to the accuracy or completeness of such information and assumes no liability associated 
with the use of such information. InnoPhase Incorporated takes no responsibility for the content in this 
document if provided by an information source outside of InnoPhase Incorporated.  
 
InnoPhase Incorporated disclaims liability for any indirect, incidental, punitive, special or consequential 
damages  associated  with  the  use  of  this  document,  applications  and  any  products  associated  with 
information in this document, whether or not such damages are based on tort (including negligence), 
warranty, including warranty of merchantability, warranty of fitness for a particular purpose, breach of 
contract or any other legal theory. Further, InnoPhase Incorporated accepts no liability and makes no 
warranty, express or implied, for any assistance given with respect to any applications described herein 
or customer product design, or the application or use by any customer’s third-party customer(s).  
 
Notwithstanding  any  damages  that  a  customer  might  incur  for  any  reason  whatsoever,  InnoPhase 
Incorporated’ aggregate and cumulative liability for the products described herein shall be limited in 
accordance with the Terms and Conditions of identified in the commercial sale documentation for such 
InnoPhase Incorporated products.  
 
Right to make changes — InnoPhase Incorporated reserves the right to make changes to information 
published in this document, including, without limitation, changes to any specifications and product 
descriptions, at any time and without notice. This document supersedes and replaces all information 
supplied prior to the publication hereof.  
 
Suitability for use — InnoPhase Incorporated products are not designed, authorized or warranted to be 
suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications 
where  failure  or  malfunction  of  an  InnoPhase  Incorporated  product  can  reasonably  be  expected  to 
result in personal injury, death or severe property or environmental damage. InnoPhase Incorporated 
and its suppliers accept no liability for inclusion and/or use of InnoPhase Incorporated products in such 
equipment or applications and such inclusion and/or use is at the customer’s own risk.

 

Summary of Contents for Talaria TWO EVB-A





























Reviews: