Figure 3
Figure 4
Figure 5
Folding Mechanism 2
Plastic Latch
Front Wheel
Assembly
Parent Tray
USING YOUR STROLLER
Stroller Frame
Proper care for your new stroller
• Clean Fabric with mild household soap and warm water.
• Clean Stroller frame with mild household soap and warm water.
• If wheel squeaks or rotates with di
ffi
culty, apply light oil. (e.g.WD-40, 3-in-1, or sewing machine oil)
• Regularly check stroller for loose or missing parts.
Imported By:
InnoPet v.o.f.
Adress: Einsteinweg 53-55, IJsselstein, The Netherlands
Zipp: 3404 LJ
E-mail: [email protected]
• Turn stroller upside down. Place the front wheel assembly onto the front stroller leg, with the arrow
facing DOWN, as seen in Figure 3. Push firmly until it snaps into place.
• With the stroller in upright position, align the parent tray with the holes on either side of the handle.
Snap each side into place by pressing firmly. See Figure 4.
• Unlatch the plastic latch on the side of
the stroller frame as seen in Figure 5.
• Pull the stroller open into the upright
position until it snaps locked into place.
• Unzip the pet compartment and remove any items from
the storage basket.
• Pull the 2nd lock(1) and press lock(2) then turn the folding
mechanisms 1 and push the stroller down to the floor.
or pull back on each of the side folding mechanisms 2 and
push the stroller down to the floor.
• Secure the plastic latch onto the silver tab to keep
the stroller closed. See Above.
OPENING
FOLDING
4
1
3
2
Folding Mechanism 1
Plastic Latch
