InnoMedia iPBX-400 Administrative Manual Download Page 68

Page: 68 / 104

December 2008 - InnoMedia

InnoMedia iPBX Administrative Guide

6.8

Storage

This page displays the storage information of internal NAND FLASH and the external USB storage.

6.8.1

Accessing the Storage Configuration Screen

Click the

icon on the navigation bar.

Click Storage link under the System menu in the left panel. The Storage screen appears (Figure

7.9).

Figure 7.9 iPBX External Storage Device Management

6.8.2

Viewing the Storage Information

Viewing the Internal Flash Memory

The system administrator can use this page to see the available space on the internal flash memory.

Disconnecting External Storage

If you have the external USB storage devices connected to the iPBX, you can disconnect them by clicking

the Disconnect button located at Action column.

Summary of Contents for iPBX-400






































































































Search results

Summary of Contents for iPBX-400

Reviews:

Related manuals for iPBX-400

Brands by name

Popular brands

InnoMedia iPBX-400, Administrative Manual

Search results

Summary of Contents for iPBX-400

Reviews:

Related manuals for iPBX-400

Brands by name

Popular brands