InnoMedia HG8328-1W Administrative Guide
Page 46
Copyright © 2019 InnoMedia. All rights reserved.
AES256 is selected from the Encryption menu.
Provisioning file should be encrypted using
Openssl.
Re-Provisioning
Interval
Time to next Re-Provision after a successful
Provision.
Provisioning Fail
Retry Interval
Provisioning Fail
Retry Cap
There are 2 associated timers:
Provisioning Fail Retry Interval : T1
Provisioning Fail Retry Cap: T2
If provisioning fails, the MTA initially retries
at T1 interval, and then doubles T1 each
time until it reaches T2, and then continues
at this interval until the system reboots or
there is a successful provisioning.
POST URL
Send HTTP POST messages to inform the
provisioning server of provisioning success
or failure. Enter the URL to which the MTA
sends HTTP POST messages.
Enable POST
Provisioning
Send HTTP POST messages to inform the
provisioning server of provisioning success
or failure. This setting only applies when
using InnoMedia’s EMS provisioning server.
Enable Firmware
Upgrade
When enabled, firmware will be
downloaded when a new version is
available. When disabled, firmware will not
download even if a new version is available.
5.7
EMS Setting
5.7.1
EMS Server
The InnoMedia EMS server is a powerful provisioning and management platform for service providers to
perform device configuration/firmware management, to be able to see Call Statistics, Voice Quality
information, and to provide the ability to connect to devices behind NAT routers for diagnostics purposes.
